Boho wallpaper installation can be an exciting and fun DIY project, but it can also be overwhelming and frustrating if you encounter common issues. These issues can range from bubbles and wrinkles to uneven patterns and improper cutting.
Issue 1: Uneven Walls
Uneven walls can be a major issue when it comes to boho wallpaper installation. If your walls are uneven, it can be challenging to get the wallpaper to adhere properly, resulting in bubbles, wrinkles, and creases.
Troubleshooting Tip:
The first step to overcoming this issue is to ensure that your walls are as smooth and even as possible. If you have large bumps or uneven areas, you may need to sand them down or use a filler to level them out. You can also use a leveling tool to check the levelness of your walls before beginning the installation process.
Once your walls are as smooth and even as possible, you can start with the wallpaper installation. It’s essential to use a good quality wallpaper adhesive that can fill in any gaps or unevenness on your walls. Apply the adhesive evenly and allow it to dry for a few minutes before placing the wallpaper on the wall.
If your wallpaper still has bubbles or wrinkles, use a wallpaper smoother to press out any air pockets. Make sure to work from the center of the wallpaper outwards to avoid creating new bubbles or wrinkles. If you have difficulty smoothing out the wallpaper, you may need to cut it into smaller sections to make it more manageable.
Issue 2: Bubbles and Wrinkles
Bubbles and wrinkles are a common issue that can occur during boho wallpaper installation. These can be caused by incorrect application, uneven walls, or improper cutting.
Troubleshooting Tip:
One of the easiest ways to avoid bubbles and wrinkles is to make sure that you’re using a high-quality wallpaper adhesive. The adhesive should be evenly applied to the wall and allowed to dry for a few minutes before placing the wallpaper on the wall.
Once you’ve placed the wallpaper on the wall, use a wallpaper smoother to press out any air pockets or wrinkles. Work from the center of the wallpaper outwards to avoid creating new bubbles or wrinkles.
If you’re still struggling with bubbles and wrinkles, you may need to make small cuts in the wallpaper to release the air pockets. Be careful not to cut too deep, as this can result in uneven patterns or gaps in the wallpaper.
Issue 3: Overlapping Seams
Overlapping seams can occur when you’re installing boho wallpaper on large walls. If you’re not careful when placing the wallpaper on the wall, the seams can overlap, resulting in a messy and uneven appearance.
Troubleshooting Tip:
One of the simplest ways to avoid overlapping seams is to measure your walls carefully and cut your wallpaper accordingly. Make sure to add an extra inch or two to the length of the wallpaper to allow for some wiggle room.
When placing the wallpaper on the wall, use a level to ensure that the wallpaper is straight and even. If you notice that the wallpaper is overlapping at the seams, carefully peel back the wallpaper and reposition it.
If the overlap is small, you may be able to use a sharp utility knife to trim the edges of the wallpaper to create a clean seam. Be sure to cut carefully, so you don’t damage the wallpaper or create an uneven pattern.
Issue 4: Pattern Misalignment
Pattern misalignment is a common issue that can occur during boho wallpaper installation. This occurs when the patterns on the wallpaper don’t match up correctly, resulting in an uneven and messy appearance.
Troubleshooting Tip:
The best way to avoid pattern misalignment is to measure your walls carefully and cut your wallpaper accordingly. Make sure to match the patterns on the wallpaper before cutting it to ensure that they align correctly.
When placing the wallpaper on the wall, use a level to ensure that the wallpaper is straight and even. If you notice that the patterns are misaligned, carefully peel back the wallpaper and reposition it.
If the pattern misalignment is significant, you may need to trim the wallpaper to create a clean seam. Be sure to cut carefully, so you don’t damage the wallpaper or create an uneven pattern.
Issue 5: Improper Cutting
Improper cutting can be a major issue when it comes to boho wallpaper installation. If your cuts are uneven or incorrect, it can result in an uneven and messy appearance.
